Face Form Finder

Sunglasses for Round Face: Size Chart With Real Frame Measurements

If your face is as wide as it is long, with full cheeks and a soft jaw, angular sunglasses are the direction to shop. Below is a side-by-side size chart of sunglasses that suit a round face, pulled directly from brand product pages.

Short answer first

A round face reads widest at the cheeks, so pick sunglasses that work by contrast: square, rectangular, or Wayfarer-style frames, or aviators with a squared-off bottom (sometimes called navigators). Choose a total frame width slightly wider than your cheekbones — the extra width makes the face read longer rather than rounder — and a moderate lens height, since deep oversized lenses that echo your face's curve can swing back the other way. Skip perfectly round sunglass lenses and small, narrow frames. Before ordering, check the three numbers on every product page: lens width, bridge width, and temple length. Not sure you have a round face? Use the face shape detector to check your four image measurements.

Round-Face Sunglasses Size Chart

Every row below was copied from a brand's own sunglass product page on 13 September 2026. Nothing is estimated or averaged. All measurements come from US product pages, and every row is a sunglasses product — not a clear-lens eyeglass frame.

Brand Model Frame Shape Lens Width Bridge Width Temple Length Scraped
Zenni Figueroa #1115821 Square 55 mm 19 mm 146 mm 2026-09-13
Zenni #1117021 Rectangle 56 mm 17 mm 143 mm 2026-09-13
Firmoo Judy321 Square 52 mm 18 mm 145 mm 2026-09-13
Firmoo LT4126 Rectangle 54 mm 17 mm 143 mm 2026-09-13
Firmoo S52617 Square 54 mm 17 mm 145 mm 2026-09-13
Yesglasses Murillo t19392-332 Rectangle 55 mm 19 mm 145 mm 2026-09-13

Source notes: All six rows are sunglasses from brand official US product pages (zennioptical.com, firmoo.com, yesglasses.com). Zenni rows: measurements visible by default in the Frame Size section (Figueroa #1115821 "Bridge width 19 mm / Lens Width 55 mm / Temple Length 146 mm"; #1117021 "Bridge width 17 mm / Lens Width 56 mm / Temple Length 143 mm"); the #1117021 page text says "Perfect for those with round face shapes" and the Figueroa page says "Best suited for round and heart-shaped faces". Firmoo rows: "Size: 52-18-145" for the Judy321, "Size: 54-17-143" for the LT4126, and "Size: 54-17-145" for the S52617 visible in the Specifications section; the Judy321 page describes "the square frame", the LT4126 page describes "rectangle lenses", the S52617 is listed under Firmoo's Square Sunglasses category, and all three pages show "in stock". Yesglasses row: the Dimensions section shows "Lens Width 55 mm / Bridge Width 19 mm / Temple Arm Length 145 mm" with a sidebar "Size 55-19-145", and the page title is "Tortoise Classic Acetate Rectangle Tinted Sunglasses with Brown Sunwear Lenses - Murillo". All pages were accessed on 13 September 2026. See the CSV for full source URLs.

Download this table

The same size chart is available as a CSV file so you can sort it, compare it against a pair you already own, or take it shopping.

Download sunglasses-for-round-face-chart.csv

How to Read the Three Numbers

Every pair of sunglasses has three key measurements listed on the product page. Here is what each one means for a round face:

Not sure how to measure your own face? See the face shape chart for how forehead, cheekbone, jaw, and face-length readings are taken.

Unit Conversion: Millimetres to Inches

Some brands list sizes in millimetres; others show inches. If you need to convert, use 1 inch = 25.4 millimetres. Below are worked examples using actual rows from the table above.

Example 1 — Zenni #1117021 (lens width)

Convert 56 mm to inches:

56 ÷ 25.4 = 2.2047 in
→ 2.20 in (rounded to two decimals)

So the Zenni #1117021 lens width of 56 mm is roughly 2.20 inches. Zenni's own product page rounds the same measurement to "56 mm / 2.2 in".

Example 2 — Yesglasses Murillo t19392-332 (bridge width)

Convert 19 mm to inches:

19 ÷ 25.4 = 0.7480 in
→ 0.75 in (rounded to two decimals)

So the Yesglasses Murillo bridge width of 19 mm is roughly 0.75 inches.

Example 3 — Firmoo LT4126 (temple length)

Convert 143 mm to inches:

143 ÷ 25.4 = 5.6299 in
→ 5.63 in (rounded to two decimals)

So the Firmoo LT4126 temple length of 143 mm is roughly 5.63 inches.

Going the other way — inches to millimetres — multiply by 25.4 instead of dividing.

What the Size Numbers Cannot Tell You

Shape direction and the right millimetres are a useful starting point for round-face sunglasses. They do not guarantee a pair you will actually want to wear. Three things the three-number size does not capture:

  1. Lens category is not a size. The three numbers say nothing about the lens itself. Tint darkness, polarization, and UV protection are separate choices, and they matter more on sunglasses than on clear glasses: polarized lenses cut glare from water and roads, and UV400 labeling — not frame size — is what protects your eyes. Two pairs with identical 55-19-146 measurements can behave completely differently in afternoon sun.
  2. Nose pads and frame weight. Sunglass lenses are tinted and often thicker, so the whole frame sits heavier than a clear-lens pair. On a round face, the fullest point is the cheeks, which gives the frame little support from below — more of that weight rides on your nose. Adjustable nose pads spread the load and let you set the height; a fixed bridge is lighter but cannot be repositioned when the pair starts to slide on a warm day.
  3. Lens height and cheek contact. The three-number trio does not include lens height, and on a round face with full cheeks this is the number that decides daily comfort: a deep, oversized lens that rests on your cheekbones will smear sunscreen, ride up when you smile, and push the frame down your nose. Moderate lens heights — and trying the pair on before committing — beat any size chart here.

Honesty note. This page gives you size numbers and shape direction for round-face sunglasses. It is not a fitting guide and it cannot tell you whether a specific pair will feel good or block enough glare for your eyes. The only way to know is to put the sunglasses on, wear them outside for at least ten minutes, and check for sliding, pressure points, and squinting.

More Face-Shape Guides

If you found this page useful, you may also want to check: